USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router manual Setmode, Readcmv, Writecmv

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide

1.20.1 setmode

setmode <mode>

Sets the mode of the ADSL link to ANSI (T1.413), G.DMT, G.Lite, or multi-mode. After executing this command, the configuration can be saved and the next time the machine is rebooted, the mode will take effect.

<mode> The mode may be ansi, gdmt, glite, or multi.

1.20.2 readcmv

readcmv <cmv_index> <offset>

The ADSL Configuration and Management Variables (CMV) can be read with the readcmv command. The CMV variables are documented in “CMV Reference Manual”. This command will only provide meaningful results when the link is operational.

<cmv_index> The cmv index may be one of the following values.

Note that they must be specified in uppercase: ADPT, CNTL, CODE, DIAG, DOPT, FLAG, INFO, INTL, MASK, OPTN, PFCL, PFRX, PFTX, PSDM, RATE, RXDA, STAT, TEST, TONE, TXDA, UOPT.

<offset>

This is a numeric value between 0 and 65535.

1.20.3 writecmv

writecmv <cmv_index> <offset> <value>

The ADSL Configuration and Management Variables (CMV) can be written with the writecmv command. The CMV variables are documented in “CMV Reference Manual”. This command will take effect only after the link is reconnected.

<cmv_index> The cmv index may be one of the following values.

Note they must be specified in uppercase: ADPT, CNTL, CODE, DIAG, DOPT, FLAG, INFO, INTL, MASK, OPTN, PFCL, PFRX, PFTX, PSDM, RATE, RXDA, STAT, TEST, TONE, TXDA, UOPT.

file:///P/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/cli.htm (39 of 71) [11/6/2002 8:58:45 AM]