U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
NAT=>Port Range Configuration
To add a Static NAT entry, set the following parameters…
●Public Address. Set the public, destination IP address inside a packet header. The router will map or redirect packets with the address that you specify.
●Public Port From. Set the first (From) port of the public address that the router maps or redirects. Options range from 1 to 65,535.
●Public Port To. Set the last (To) port of the public address that the router maps or redirects. Options range from 1 to 65,535.
●Local Address. Set the IP address of a machine on the local LAN. The router directs packets to this address.
●Local Port From. Set the first (From) port of the local address that the router uses. Options range from 1 to 65,535.
●Local Port To. Set the last (To) port of the local address that the router uses. Options range from 1 to 65,535.
●Protocol. Set protocol. Your protocol setting applies to the other parameters on this page. Your options are TCP or UDP port numbers.
To save and install Port Range Configuration data…
1.Input the data.
2.Click Apply.
file:///P/T_WRITER/Documentation/Released/900...ide/9003%20(Guiness)%20prac%20template/wui.htm (32 of 55) [11/6/2002 8:53:38 AM]
