USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router manual Connect the Power Adapter

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide

O/I	Pushbutton switch that turns the U.S. Robotics SureConnect ADSL
	Ethernet/USB Router on and off.
Power	Input jack that accepts cable from wall power supply.
Console	Connects an RS-232 cable (not included) to the router. You can use the cable
	to communicate to the router through the Terminal User Interface. The Terminal
	User Interface (TUI) is another way to configure the router or get diagnostic
	information. The TUI substitutes for the Web User Interface.
USB	Universal serial bus port on the back of the router.
ENET1	Ethernet Port 1 on the back of the router.
ENET2	Ethernet Port 2 on the back of the router.
ADSL	Digital subscriber line RJ-11 service jack on the back of the router.

Connect the Power Adapter

Be sure to only use the included power supply. Connect the power adapter cord to the “Power” jack at the rear of the router. Connect the power adapter to a standard wall outlet.

Turn on the router by pressing the power button labeled “O / I.” The “PWR” LED on the front panel of the U.S. Robotics ADSL Ethernet/USB Router will be illuminated if power is being supplied to the router. The router will initialize after the power is plugged in. This process takes about a minute. Click Next to initialize the router.

file:///P/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/installa.htm (10 of 25) [11/6/2002 8:55:05 AM]