U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
6.Verify that only the Routed configuration appears on the Current ATM PVC List. (This is the list on the bottom of the screen. See Figure 3.)
7.See the Current ATM PVC List at the bottom of the screen (Figure 3). On this list, verify your settings for
VPI and VCI. | Figure 3 |
8.On the Current ATM PVC List, see “Encap.” Verify your Encapsulation Mode settings. (See Figure 3.)
9.On the Current ATM PVC List, see “NAT.” Verify that NAT is “Off.” (See Figure 3.)
10.Click the Network tab at the top of the window.
11.Click LAN Setup.
Figure 4
12.Verify your LAN IP
address setting. (See Figure 4.)
13.Verify your subnet setting. (See Figure 4.)
file:///P/T_WRITER/Documentation/Released/900...%20(Guiness)%20prac%20template/configexamp.htm (26 of 33) [11/6/2002 9:00:35 AM]
