U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
When you use MAC Encapsulated Routing (MER), Ethernet frames bridge over the ATM Virtual Circuit. The router can still perform IP routing with Network Address Translation (NAT) for the LAN. To perform this NAT function, the router requires a static IP address for its MER interface. Your ISP must supply the address. The router also supports dynamic assignment of IP addresses to local network nodes. When using dynamic assignment, the router acts as a DHCP server.
Setup
1.Open the SureConnect Web User Interface (WUI). This example employs the Web User Interface. You can set up the Network Model with any of the router's three interfaces. The other two interfaces are the Terminal User Interface (TUI) and the
2.Click the Service Provider Settings tab. This tab is on the top of the screen. The Service Provider Settings Window opens.
3.Click ADSL Standard. The ADSL Standard Window opens.
4.Select the ADSL protocol that you’ll use. For most users, Multi Mode is the right choice.
5.Click Apply.
6.Click WAN Setup. The WAN Setup Window opens.
file:///P/T_WRITER/Documentation/Released/900...%20(Guiness)%20prac%20template/configexamp.htm (5 of 33) [11/6/2002 9:00:35 AM]
