USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router

Specifies the version of the RIP protocol that will be used. The permissible values are 1 or 2. The default is 1.

ver -o <12>

Lists the routes currently available.

list

Note: For these new values to take effect, the configuration must be saved. The next time the system is booted, these values will be in effect.

1.12 Bridge

The bridge commands are located in the “bridge” directory.

group <interface_name> <interface_name> -o -if <interface_name> -if <interface_name>

Assigns or groups two or more interfaces to the bridge.

interface_name The name of an interface e.g. eth0, eth1 , atm0 ,atm1 etc. Examples:

bridge group eth0 -o -if eth1 -if usb0 -if atm1

The interfaces eth0, eth1 and usb0 are assigned to the bridge atm1. bridge group eth0 -o -if atm0

The interfaces eth0, and atm0 are assigned to the bridge.

file:///P/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/cli.htm (24 of 71) [11/6/2002 8:58:45 AM]