U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
4. Verify that you’ve selected Multi Mode. (See Figure 2.)
5. Click the WAN
Setup.
6. Verify that only the PPPoA configuration appears on the Current ATM PVC List. (This is the list on the bottom of the screen. See Figure 3.)
7. See the Current ATM PVC List at the bottom of the screen. On this list, verify your settings for VPI and VCI. (See Figure 3.)
8. On the Current ATM PVC List, see “Encap.” Verify your Encapsulation Mode settings. (See Figure 3.)
9. On the Current ATM PVC List, see “NAT.” Verify that NAT is “On.” (See Figure 3.)
10. On the Current ATM PVC List, verify your ISP- assigned, PPPoA username. (See Figure 3.)
11. See the Current ATM PVC List (Figure 3). Verify the authentication protocol that your ISP uses. This protocol must appear on the list.
Figure 2
Figure 3
file:///P/T_WRITER/Documentation/Released/900...%20(Guiness)%20prac%20template/configexamp.htm (14 of 33) [11/6/2002 9:00:35 AM]
