U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
2.Click the Service Provider Settings tab. This tab is on the top of the screen. (See Figure 1.)
3.Click ADSL Standard. (See Figure 1.)
4.Verify that you’ve selected Multi Mode. (See Figure 2.)
Figure 2
5.Click WAN Setup.
6.Verify that only the PPPoE configuration appears on the Current ATM PVC List. (See Figure 3.)
7.See the Current ATM PVC List at the bottom of the screen (Figure 3). On this list, verify your settings for VPI and VCI.
8.On the Current ATM PVC List, see “Encap.” Verify your Encapsulation Mode settings. (See Figure 3.)
Figure 3
9.On the Current ATM PVC List, see “NAT.” Verify that NAT is “On.” (See Figure 3.)
10.On the Current ATM PVC List, verify your ISP- assigned, PPPoE username. (See Figure 3.)
file:///P/T_WRITER/Documentation/Released/900...%20(Guiness)%20prac%20template/configexamp.htm (19 of 33) [11/6/2002 9:00:35 AM]
