USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router manual 25.19 mer, Relay, Enable

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide

Configures the specified WAN interface to use 1483MER (MAC Encapsulation Routing). The “mer” command is used to enable the configuration.

Port The MER interface name (mer0).

<vpi> <vci > These are the vpi, vci values on which the 1483 is configured. vpi,vci are assigned with the vcadd command. The showatmconn command can also be used to list the current ATM connections with their respective vpi and vci values. (Note the vcadd and showatmconn commands are located in the “atm” directory). The vpi value is between 0 - 255. The vci value is between 0 - 65535.

-encapsulation llc vc Specifies the encapsulation type. The possible values are ‘llc’ or ‘vc’ which represent Logical Link Control or VC multiplexing respectively.

1.25.19 mer

mer enable disable Delete Status

Enables, disables, deletes or gives status of the 1483MER configurations.

1.25.20 relay

relay

relay -o -client <-if interface> <-pvc vpi vci> relay -o -server <-if interface> <-pvc vpi vci> relay -o enable disable

relay -o -display

Configures and enables PPPoE relay.

-client <-if interface> <-pvc vpi vci>

Specifies the server interface for the PPPoE Relay. The PPPoE server is connected to this interface. The interface may be ppp0, ppp1, ppp2, ppp3, ppp4, ppp5, ppp6, or ppp7.

-server <-if interface> <-pvc vpi vci>

Specifies the client interface for the PPPoE Relay. The PPPoE clients are connected to this interface. Typically eth0 is specified.

enable

file:///P/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/cli.htm (70 of 71) [11/6/2002 8:58:46 AM]