124VISIONEER 9750 SCANNER USERS GUIDE

6.If necessary, adjust the settings of the previewed image:

Change the button selection for the type of image.

Adjust the custom settings; refer to the next section, “Fine Tuning Your Scans”.

If you’re scanning from the Flatbed, change the size of the scanned image. To do this, click and hold the mouse pointer over one of the four sizing-boxes on the corners of the previewed image. Then drag the box to increase or decrease the size of the image.

7.Preview the image again. When you are satisfied with the image, click the Scan button.

8.The scanned images will appear in Microsoft Paint (or other WIA application you’re using).

Page 131
Image 131
Visioneer manual Visioneer 9750 Scanner USER’S Guide