CONFIGURING THE ONETOUCH BUTTONS 39

To make sure all of your computer’s Destination Applications are linked to OneTouch 4.0, click the Refresh button.

Important: Later on, if you install new software that can be used as a Destination Application, click the Refresh button again to link the new software to OneTouch 4.0. Note that some software installed on your computer may be incompatible with OneTouch 4.0. Incompatible software will not be listed as a Destination Application.

Select Configuration—The list of available scan configurations for the selected button. The configuration’s basic settings include: scanning mode, resolution (dpi), page size, brightness (Br), and contrast (Cr). To see a selected scan configuration’s settings, click its icon. Click the icon again to close the detailed information.

Click the icon of a selected configuration to view its settings.

These icons next to each scan configuration indicate the scanning mode:

Color Black and White Grayscale

Configure

 

Before Scan

Note: Use Configure Before Scan if you want to set the scanning mode manually before scanning. See “Configuring Before Scanning” on page 73.

You can also click the Edit button or double click the configuration to see more detailed information about the selected configuration.

Page 46
Image 46
Visioneer 9750 manual Color Black and White Grayscale Configure