Visioneer 9750 manual Scanning Basics, Load a Stack of Documents

SCANNING BASICS 27

SCANNING BASICS

Your scanner can scan a stack of documents using the Automatic Document Feeder, or a single page on the Flatbed glass.

Note: Always remove any staples or paper clips from documents before inserting them into the scanner. Staples and paper clips can jam the feed mechanism and scratch the internal components. Also remove any labels, stickers, or Post-It™ notes that may come off during the scanning process and get stuck in the scanner. Misuse as described here will void your scanner’s warranty.

LOAD A STACK OF DOCUMENTS

1.Lift the document cover and make sure no pages have inadvertently been left on the Flatbed glass.

2.Unfold the Paper Guide Extension and adjust the Paper Guide for the size of paper.

Paper Stop Slide.

3.Adjust the Paper Stop at the back of the scanner for the size of the paper. Pull out the slide on the Stop for letter-sized pages. Push it in for legal-sized pages.