Visioneer 9750 manual Power, Connect The Usb Cable And Turn On The

18VISIONEER 9750 SCANNER USER’S GUIDE

STEP 4: CONNECT THE USB CABLE AND TURN ON THE

POWER

Your Visioneer 9750 scanner connects to any available USB port. Check your computer’s manual for the USB port locations.

Note: You can connect the scanner to your computer while the computer is running. You do not have to shut down your computer.

1.Remove any protective tape from the USB cable.

2.Plug the USB cable into the USB port on the scanner then into a USB port on the computer. Connection to a USB 2.0 High Speed port provides optimum performance, however your scanner will also connect to a USB 1.1 port.

The USB symbol, as seen in the above diagram, identifies the location of the USB port on your computer. If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the plug into the connection.

You can also connect the scanner to a USB port on the computer’s keyboard if it has one, or to a USB hub. If you use a USB hub, it must have its own power supply already plugged into an electrical outlet.