10 Paper and other Media

Loading the Bypass Tray

Remove any curl on postcards and labels before loading them into the Bypass Tray.

1.Lower the bypass tray, located on the front of the product and unfold the paper support extension.

2.Prepare a stack of paper for loading by flexing or fanning them back and forth. Straighten the edges on a level surface.

3.Load the print material with the print side facing down and against the right edge of the tray.

NOTE: Hold transparencies by the edges and avoid touching the print side.

Bypass Tray

4.Adjust the paper guide to the

width of the stack of print material. Ensure you have not loaded too much print media. The stack should be under the Max. Fill Line.

Paper Guide

Max Fill Line

5.The UI screen shows the current paper supply settings for the Bypass Tray on the left hand side. Press the Size button and/or the Type or Color button to change the settings if necessary. If the settings are correct, press the Confirm button. Please refer to Setting the Paper Size in the Paper and other Media chapter on page 162.

158

Xerox Phaser 3635MFP User Guide

Page 164
Image 164
Xerox 3635MFP/S manual Loading the Bypass Tray