12 Maintenance

Cleaning the Machine

WARNING: When cleaning your machine DO NOT use organic or strong chemical solvents or aerosol cleaners. DO NOT pour fluids directly onto any area. Use supplies and cleaning materials only as directed in this documentation. Keep all cleaning materials out of the reach of children.

WARNING: DO NOT use pressurised air-spray cleaning aids on or in this equipment. Some pressurised air-spray containers contain explosive mixtures and are not suitable for use in electrical applications. Use of such cleaners can result in a risk of explosion and fire.

CAUTION: DO NOT remove the covers or guards that are fastened with screws. You cannot maintain or service any of the parts that are behind these covers and guards. DO NOT attempt any maintenance procedure that is NOT specifically described in the documentation supplied with your machine.

Document Glass and Constant Velocity Transport (CVT) Glass

1.Use a soft, lint-free cloth, lightly dampened with water. Liquid should never be poured directly onto the glass.

2.Wipe clean the entire glass area.

3.Wipe away any residue with a clean cloth or paper towel.

Document glass

CVT glass

NOTE: Spots or marks on the glass will be reproduced on the prints when copying from the document glass. Spots on the Constant Velocity Transport Glass will show up as streaks on the prints when copying from the document feeder.

The Control Panel and Touch Screen

Regular cleaning keeps the touch screen and control panel free from dust and dirt. To remove finger prints and smudges, clean the touch screen and control panel as below:

1.Use a soft, lint-free cloth, lightly dampened with water.

Xerox Phaser 3635MFP User Guide

201

Page 207
Image 207
Xerox 3635MFP/S manual Cleaning the Machine, Document Glass and Constant Velocity Transport CVT Glass