5 Network Scanning

2.Select Network Scanning on the touch screen. Ensure that the Network Scanning screen is displayed.

NOTE: If an authentication feature is enabled, you may need an account number before using the machine. To get an account number, or for more information, contact the System Administrator.

3 Select Network Scanning Template

Network Scanning uses preset templates created by the System Administrator. These templates already contain feature settings customized to the user. Use the up/down scroll buttons located to the right of the Template List on the Network Scanning tab to move through the list and select a Template.

To get quickly to a specific page in the Template list, use the number keypad to identify the page number then select the pound (#) key. The counter will display the page location.

For more information on Network Scanning templates, refer to Network Scanning on page 92.

4 Change Feature Settings

To temporarily change the template settings, perform the following:

1.Press the Clear All button once on the control panel to cancel any previous selections. The control panel returns to the default Entry screen.

88

Xerox Phaser 3635MFP User Guide

Page 94
Image 94
Xerox 3635MFP/S manual Select Network Scanning Template, Change Feature Settings