12 Maintenance
If after fitting a new Print Cartridge the front door will not close, check that the Print Cartridge is positioned and latched correctly.
If you have replaced the Print Cartridge as a result of a “Replace the Print Cartridge” message on the machine display, the machine will assume that you have fitted a new cartridge and reset the toner usage counters and messages. If, however, you have fitted a new Print Cartridge without being instructed to do so by the machine display, the toner usage counters will need to be reset manually. This is done in the Access tools mode using the Supplies Management - Print Cartridge
Staple Cartridge
This procedure shows you how to remove a used Staple Cartridge and replace it with a new Staple Cartridge.
1.Open the Staple Cartridge cover at the front of the machine.
Convenience stapler
Staple
Cartridge cover
2.Pull on the blue handle to remove the empty Staple Cartridge.
3.Remove the used Staple Cartridge from the cartridge holder.
4.Dispose of the used Staple Cartridge.
5.Remove the new Staple Cartridge from its packaging.
6.Make sure that the staple strips on
top of the stack are complete and flat. Remove any partial strips and any strips that are bent.
7.Insert the new Staple Cartridge into the cartridge holder, and push the Staple Cartridge in firmly until it clicks into position.
8.Close the Staple Cover door.
200 | Xerox Phaser 3635MFP User Guide |