
3 Copy
If necessary, press one of the tabs and configure the copy settings. For information on the individual tabs, refer to the following:
Basic Copying - page 45
Image Quality - page 48
Layout Adjustment - page 50
Output Format- page 54
3 Enter the Quantity
The maximum copy quantity is 999.
Use the numeric keypad on the control panel to enter the number of copies required. The number entered is displayed in the upper
NOTE: To cancel an incorrect entry, press the Clear C button and enter the correct quantity.
4 Start the Copy Job
Press the Start button. Each document is scanned only once. The number of copies requested is displayed in the upper
5 Job Status Screen
1.Press the Job Status button on the control panel to display the Job Status screen.
Xerox Phaser 3635MFP User Guide | 41 |