11 Setups

Change Default Settings

Changing the user defaults to reflect the needs of the users will make the machine more user-friendly, increasing effectiveness and productivity.

Set (Power Save) Duration Times

This utility enables the System Administrator to modify the default 30 minutes the machine will spend between standby and low power modes.

The machine is designed to be energy efficient and will automatically reduce its power consumption after periods of inactivity.

To change the elapsed time for the machine to go from Standby Mode to Low Power Mode, select the appropriate time frame, e.g. after 5 minutes duration, after 45 minutes duration, etc.

Select the Save button to confirm the change.

Tools > Device Settings > General > Energy Saver

Entry Screen Default

This feature enables the machine administrator to set which screen the user sees first.

The Entry Screen appears when the machine resets selections after a user has completed a job, or after the Clear All button is pressed. The available options are Features, Job Status, Machine Status and All Services. To set one of the options, touch the appropriate button and then select Save.

Tools > User Interface > General > Screen Defaults > Entry Screen

Default

Job Status Default

Use this feature to set the default screen when the user presses the Job

Status button to the left of the UI. For a full list of available screens, refer to

Job Status Screen in the Copy chapter on page 41.

Tools > User Interface > General > Screen Defaults > Job Status Default

Feature Default and Priority

Use this feature to change the priority of the Copy, ID Card Copy, Fax and Email features.

The highest priority service will be displayed as the default service on the machine. The next two services will be displayed as buttons in the Features

182

Xerox Phaser 3635MFP User Guide

Page 188
Image 188
Xerox 3635MFP/S manual Change Default Settings, Set Power Save Duration Times, Entry Screen Default, Job Status Default