3 Copy

Copy Procedure

This section describes the basic procedure for making copies. Follow the steps below.

Load the Documents – page 38

Select the Features – page 39

Enter the Quantity – page 41

Start the Copy Job – page 41

Job Status Screen – page 41

Stop the Copy Job – page 43

NOTE: If an authentication feature is enabled, you may need an account before using the device. To get an account, or for more information, contact the System Administrator.

1 Load the Documents

You can load the documents to be copied either on the Document Glass or through the Document Feeder.

For information on setting up the paper trays, refer to Setting up Paper Trays in the Setups chapter on page 178.

Document Feeder:

The following steps explain how to load documents using the document feeder:

1.Before loading the documents into the document feeder, ensure they are in good condition and remove all staples and paper clips.

2.Insert the documents neatly into the document feeder, face up. The first page should be on top with the headings towards the left of the machine.

38

Xerox Phaser 3635MFP User Guide

Page 44
Image 44
Xerox 3635MFP/S manual Copy Procedure, Load the Documents, Document Feeder