Network Configuration
NTP
Network Time Protocol (NTP) is used to synchronize the internal clocks of computers over a network connection at system startup and every subsequent
CAUTION: Enabling NTP or modifying NTP settings causes the printer to restart.
Note: If your printer is locked, you must log in as a system administrator. For details, see Accessing CentreWare IS on page 17.
1.In CentreWare IS, click Properties > Connectivity > Protocols > NTP.
2.Under Offset of Greenwich Mean Time, select the number of hours your local time is offset from GMT.
3.Under Network Time Protocol, select Enabled to enable the protocol.
4.Select either IPv4 or Host Name for the address type of the NTP server.
5.Type the appropriately formatted addresses and port numbers in the Primary Server and, if needed, the Alternate Server address fields. The default port number is 123.
6.Click Apply.
WorkCentre 6400 Multifunction Printer | 45 |
System Administrator Guide |
|