Sigma SQC-122c manual Chapter Menus Quick Setup Menu, Exit to Main Edit, Prev Layer, Next Layer

Chapter 3 Menus

3.3Quick Setup Menu

The Quick Setup Menu provides access to the most commonly adjusted parameters for the current process and layer.

Exit to	THICKNESS(kA)	RATE(A/s)	POWER(%)
	0.000	0.0	0.0
Main
	My Process 1 -> Layer 1-> Aluminum
	Parameter	Value	Units
	Init Rate	11.1	A/s
	Fnl Thk	0.101	kA
Edit	P Term	50	None
	I Term	0.7	Sec.
Prev	D Term	0.0	Sec.
Layer	Sensor 1	On	On/Off
Next	Sensor 2	On	On/Off
	Output	Out1	Out1/Out2
Layer
	Max. Power	76.0	%
	Slew Rate	10.0	%
	Material	Aluminum

Quick Setup Menu

Exit to Main

Edit

Returns to the Main Menu.

Selects the highlighted parameter for edit. SoftKey functions change to:

Next: Store parameter and move to next for editing.

Cancel: Stop editing and undo changes to selected parameter.

Enter: Stop editing and save values for selected parameter.

Control Knob: Turn to adjust value. Push to store value and move to next parameter.

Prev Layer	Displays the parameters for the previous layer in the process.
Next Layer	Displays the parameters for the next layer in the process.

3-5