Adding Static Routes 42
HomePortal 3801HGV Gateway User Guide Configuring Broadband Settings
9. Enter the Subnet Mask address in the text box. This is the router mask of the secondary
subnet.
10. Select the Auto Firewall Open check box to disable the firewall for all devices using
addresses from this subnet.
11. Clear the Routing check box to ensure that the gateway does not assign IP addresses to
LAN devices through DHCP.
12. Click Save.
The bridge mode is enabled on the gateway, and LAN devices are configured to take the Broadband
IP address. The service LED on the front panel of the device remains off when the gateway is in
bridge mode. The supplementary network represented by the router is tailed to the gateway.
Adding Static Routes
Objective
To add static routes.
This task lets you manually configure static routes for specifying the transmission path that the
data must follow between devices outside the gateway network.