Chapter 5 - Monitoring and Testing the Campus System
RESETTING THE CAMPUS UNIT
You can issue a reset for the Campus unit which causes it to complete a soft reboot. Use this function when one of the following occurs:
•The Port LED flashes green and the REX2 Module Not Ready message is displayed when trying to access the REX2 interface. This indicates that the Campus desktop or line unit is not communicating with the REX2 card for more than 1 minute after
•HDSL, REX2, or system configuration changes have been made, but not saved, and you want to revert to the previously saved configuration.
•The REX2 is not functioning properly as indicated by excessive LAN errors or Not available displayed for configuration values.
During the reset, the Port and HDSL LEDs on the desktop unit flash.
It is not required that you reset the REX2 after a configuration change or when you complete a save function.
1From the Main Menu, type 4 then press ENTER .
Jul 07, | 2003 | ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34 | ||
Local Unit ID: | Southall Quad 4 | Local I/F: REX2 |
| |
Remote Unit ID: | Inactive | Remote | I/F: Inactive | |
Circuit | ID: | Southeast line 421 |
|
|
MAIN MENU
1)SYSTEM STATUS
2)REX2 CONFIGURATION AND STATUS
3)SYSTEM CONFIGURATION
4)MAINTENANCE
5)REMOTE LOGON
(L)ogout
ENTER CHOICE>
89 |