Chapter 1 - Installing and Accessing the REX2
POWERING UP AND CHECKING THE CONNECTION
Verify operating status after completing a full installation that includes installing of the Campus-REX2 into a desktop unit or Campus-Star chassis and then completing the installation of the desktop unit or the Campus-Star chassis (including the Line Unit):
1Verify that the power cord is connected to the desktop unit or to the Campus-Star chassis (if you have an AC power supply) and to an external power source. Then verify the powerup of and HDSL connection for that unit as specified in the appropriate user manual.
2If the Campus-REX2 is installed in a desktop unit, press the power button to On. The button is located on the back of the desktop unit.
3Verify that the Link LED on the Campus-REX2 card is green. This indicates that the 10/100Base-T connection is operating correctly. If the Link LED does not light green, check the 10/100Base-T cabling configuration.
If the link LED does not light green, check that the MDI/MDI-X switch is set to the appropriate position.
Campus-REX2 RS Interface Card User Manual | 7 |