Chapter 4 - Managing System Parameters
2Type 4 then press ENTER . At the prompt, enter a unique identifier for this HDSL circuit, up to 64 characters.
Maximum length is 64 characters.
ENTER NEW CIRCUIT ID: Southeast line 421
The unit and circuit IDs are displayed as shown below. To configure or change the unit and circuit IDs for the Campus unit at the other end of the HDSL connection, access it using either telnet or the remote log on (see “Logging In” on page 12).
Jul 07, | 2003 | ADC TELECOMMUNICATIONS, CAMPUS RS, Version | 5.1 08:19:34 | |
Local Unit ID: Southall Quad 4 | Local I/F: | REX2 | ||
Remote Unit | ID: Central | Remote I/F: REX2 | ||
Circuit | ID: | Southeast line 421 |
|
|
SYSTEM PARAMETERS
1)CHANGE SYSTEM TIME
2)CHANGE SYSTEM DATE
3)CHANGE UNIT ID
4)CHANGE CIRCUIT ID
5)CHANGE UNIT PASSWORD
6) | HDSL ES Alarm Threshold: | Disabled | (Disabled, 17, 170) |
7) | HDSL Margin Alarm Threshold: | Disabled |
|
8) | Local Data Port LOS Alarm: | Disabled | (Disabled, Enabled) |
9) | Remote Data Port LOS Alarm: | Disabled | (Disabled, Enabled) |
10) | RESTORE FACTORY DEFAULTS |
|
|
| (R)eturn |
| |
ENTER CHOICE>
The new Unit and Circuit IDs take effect immediately after the values are entered and a save command is not required.
68 |