Chapter 7 - Using the LCD for Configuration and Management
•number of frames received and transmitted
•number of multicast frames received and transmitted
•number of errored frames received and transmitted
•number of undersized frames received
•number of oversized frames received
•number of excessive delay events for transmitted frames
•number of excessive collision events for transmitted frames
•number of bridge frames received and transmitted (Bridge only)
•number of frames received that were discarded (Bridge only)
Bridge Port Statistics
To view the Bridge Port Statistics:
1Press Escape until CAMPUS RS I/F: REX2 is displayed.
2Press Next until REX2 CONFIG & STATUS is displayed.
3Press Enter. CONFIGURE REX2 SETTINGS is displayed.
4Press Enter. NETWORK PROTOCOL = Bridge is displayed (if not, you must change the setting to Bridge to view Bridge Port Statistics).
5Press Next until Bridge STATISTICS is displayed.
6Press Enter. FRAMES is displayed.
7Press Enter to display the first screen of statistics.
8Press Next to display the second screen of statistics (if any).
9Press Escape to return to the statistics title screen.
10Press Next to advance to the remaining statistic items, displayed in order:
MULTICASTS, BRIDGE FRAMES, DISCARDS, ERRORS, UNDERSIZED, OVERSIZED, EX. DELAY, and EX. COLLISIONS. Repeat steps
11To clear the statistics, press Next until Press ENTER to Clear Statistics is displayed. Press Enter to reset all statistics to zero.
117 |