Chapter 2 - Configuring HDSL Parameters
CONFIGURING HDSL PARAMETERS
Access the HDSL configuration screen, then configure parameters.
Accessing HDSL Configuration
From the Main Menu (page 14), type 3 then press ENTER to access the System Settings Menu.
Jul 07, | 2003 | ADC TELECOMMUNICATIONS, CAMPUS RS, Version | 5.1 08:19:34 | |
Local Unit ID: |
| Local I/F: | REX2 | |
Remote Unit ID: Inactive | Remote I/F: Inactive | |||
Circuit | ID: |
|
|
|
SYSTEM SETTINGS MENU
1)SYSTEM PARAMETERS
2)HDSL PARAMETERS
(R)eturn
ENTER CHOICE>
From the System Settings Menu, type 2 then press ENTER to access the HDSL Parameters screen. From this screen, you can configure or change values. Standard Mode is the default HDSL Parameters screen.
Jul 07, | 2003 | ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34 | ||
Local Unit ID: |
|
| Local I/F: REX2 | |
Remote Unit ID: Inactive |
| Remote I/F: Inactive | ||
Circuit | ID: |
|
|
|
|
| STANDARD MODE HDSL PARAMETERS | ||
1) | HDSL Operating Mode: | Standard | (Standard, Extended) | |
2) | Transceiver Mode: | Auto | (Auto, Master, Slave) | |
3) | HDSL Rate: |
| T1 | (T1, E1, 768) |
Enter (S)ave to apply changes !
(S)ave (R)eturn (M)ain Menu
ENTER CHOICE>
20 |