ADC Campus-REX2 RS MANAGING, SYSTEM PARAMETERS

MANAGING 4

SYSTEM PARAMETERS

This chapter describes how to configure system operating parameters for the Campus-REX2 including time and date, identification of the unit and circuit, and a configuration password. You can reset configurable operating parameters to their default values in the chapter. Also, you can view information about the product.

For:	See Page:
Accessing System Configuration	66
Setting the Time and Date	67
Identifying the Unit and Circuit	67
Setting a Password	69
Restoring Default Values	70
Viewing Product Information	72

HDSL alarm parameters are configured in the section for “Configuring HDSL Parameters.” See “Configuring HDSL Alarms” on page 26.

Campus-REX2 RS Interface Card User Manual 65