Chapter 3 - Configuring the REX2

Accessing the Routing Tables

The Campus-REX2 has two separate routing tables. One table shows routes that were statically configured (“Managing the Static Routing Table” on page 57) and offers the capability of configuring additional static routes. The other table shows IP addresses that were dynamically learned by RIP (“Viewing the Dynamic Routing Table” on page 59).

Do the following to access the Router Configuration screen:

1From the Main Menu (page 1-14), type 2 then press ENTER to access the REX2 Configuration and Status screen. Ensure Router is selected.

2From the REX2 Configuration and Status screen, type 4 then press ENTER . The Router Configuration screen is displayed.

Jul 07,

2003

ADC TELECOMMUNICATIONS, CAMPUS RS, Version

5.1 08:19:34

Local Unit ID:

Local I/F:

REX2

Remote Unit ID:

Remote I/F: REX2

Circuit

ID:

 

 

ROUTER CONFIGURATION

1)IP ADDRESS CONFIGURATION

2)RIP CONFIGURATION

3)STATIC ROUTE CONFIGURATION

4)DYNAMIC ROUTE TABLE

5)STATIC ROUTE TABLE

6)ARP TABLE

7)DHCP SERVICES

(R)eturn (M)ain Menu

ENTER CHOICE>

56

Campus-REX2 RS Interface Card User Manual