Chapter 3 - Configuring the REX2
3To configure RIP for the LAN and Line ports, do the following:
a To select the version of RIP packets that will be received by the LAN port, type 5 then press ENTER . Repeat until the preferred RIP version is selected:
•None indicates that a RIP version is not selected.
•RIP1 indicates that only RIPv1 packets will be received by the LAN port.
•RIP2 indicates that only RIPv2 packets will be received by the LAN port.
•Both indicates that both RIPv1 and RIPv2 packets will be received by the LAN port.
bTo select the version of RIP packets that will be sent by the LAN port, type 6 then press ENTER . Repeat until the preferred RIP version is selected:
•None indicates that a RIP version is not selected.
•RIP1 indicates that only RIPv1 packets will be sent by the LAN port.
•RIP2 indicates that RIPv2 multicast packets will be sent by the LAN port.
•RIP1c indicates the RIPv2 broadcast messages will be sent by the LAN port.
cTo select the version of RIP packets that will be received by the Line port, type 7 then press ENTER . Repeat until the preferred RIP version is selected:
•None indicates that a RIP version is not selected.
•RIP1 indicates that only RIPv1 packets will be received by the Line port.
•RIP2 indicates that only RIPv2 packets will be received by the Line port.
•Both indicates that both RIPv1 and RIPv2 packets will be received by the Line port.
50 |