ADC Campus-REX2 RS Logging In a Local Campus Unit through the Console Port

Chapter 1 - Installing and Accessing the REX2

Logging In a Local Campus Unit through the Console Port

You previously set up the terminal communication settings (Step 3 on page 1-11) for your PC to access the Campus unit. From your terminal emulation software or your terminal, do the following:

1Press the SPACEBAR on the PC keyboard several times until the baud rate is established and the Login Password screen is displayed as shown below.

Jul 07, 2003	ADC TELECOMMUNICATIONS, CAMPUS RS, Version		5.1 08:19:34
Local Unit ID:		Local I/F:	REX2
Remote Unit ID: Inactive		Remote I/F: Inactive
Circuit ID:

LOGIN PASSWORD >

If the system does not respond when you attempt to log on, ensure that hardware flow control is turned off in the terminal emulation software on the PC or for the terminal.

Campus-REX2 RS Interface Card User Manual 13