Chapter 7 - Using the LCD for Configuration and Management

Router Port Statistics

To view the Router Port Statistics:

1Press Escape until CAMPUS RS I/F: REX2 is displayed.

2Press Next until REX2 CONFIG & STATUS is displayed.

3Press Enter. CONFIGURE REX2 SETTINGS is displayed.

4Press Enter. NETWORK PROTOCOL = Bridge is displayed (if not, you must change the setting to Bridge to view Bridge Port Statistics).

5Press Next until Bridge STATISTICS is displayed.

6Press Enter. FRAMES is displayed.

7Press Enter to display the first screen of statistics.

8Press Next to display the second screen of statistics (if any).

9Press Escape. FRAMES (or the appropriate statistic title screen) is displayed.

10Press Next to advance to the desired statistic item, displayed in order:

MULTICASTS, ERRORS, UNDERSIZED, OVERSIZED, EX. DELAY, and EX. COLLISIONS. Repeat steps 7-9 as desired to display the statistics for the item.

11To clear the statistics, press Next until Press ENTER to Clear Statistics is displayed. Press Enter to reset all statistics to zero.

118

Campus-REX2 RS Interface Card User Manual