Chapter 3 - Configuring the REX2
1From the Router Configuration screen, type 3 then press ENTER . The Static Route Configuration screen is displayed.
Jul 07, | 2003 | ADC TELECOMMUNICATIONS, CAMPUS RS, Version | 5.1 08:19:34 |
Local Unit ID: | Local I/F: | REX2 | |
Remote Unit ID: | Remote I/F: REX2 | ||
Circuit | ID: |
|
|
STATIC ROUTE CONFIGURATION
1)ADD STATIC ROUTE
2)DELETE STATIC ROUTE
3)STATIC ROUTE TABLE
(R)eturn (M)ain Menu
ENTER CHOICE>
2To add a static route, type 1 then press ENTER . Enter the IP address, subnet mask, and gateway IP address at the prompt for the destination host to which packets will be sent.
Required format is nnn.nnn.nnn.nnn
Enter Destination IP Address: 192.128.128.60
Enter Destination IP Subnet Mask: 255.255.255.0
Enter Gateway IP Address: 192.128.128.65
Enter Hop Count: 3
The following message is displayed:
Route added
Hit Any Key to Continue
3To delete a static route, type 2 then press ENTER . Enter the IP address at the prompt for the destination host you want to delete.
Required format is nnn.nnn.nnn.nnn
Enter Destination IP Address: 192.128.128.60
If you do not remember the IP address for the destination you want to delete, go to Step 4 to view the Static Route Table.
52 |