Chapter 3 - Configuring the REX2

CONFIGURING THE CAMPUS-REX2FOR SNMP MANAGEMENT

SNMP protocol provides a way for HP OpenView or an Element Management System (EMS) such as StarGazer to manage the Campus-REX2 system over a network. A Campus-RS Management Unit (CMU), installed into a Campus-Star chassis, provides SNMP management for components in the chassis and for management of elements attached to the chassis (desktop units or units in other Campus-Star chassis). The EMS can directly manage a Campus-REX2 that is in a desktop unit or a Campus-Star chassis.

You can also set the Campus-REX2 to perform authentication error trap generation. To enable this feature, do the following:

•Set the Authentication Trap Status to Enabled or Disabled.

•Enter an IP Address for each Trap Receiver.

•Enter a community string for each Trap Receiver.

Accessing the SNMP Configuration

1From the Main Menu (page 1-14), type 2 then press ENTER to access the REX2 Configuration and Status screen.

Jul 07, 2003

ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34

Local Unit ID: Southall Quad

4

Local I/F: REX2

Remote Unit ID: Central

 

Remote I/F: REX2

Circuit ID: Southeast

line 421

 

 

 

 

REX2 CONFIGURATION

AND STATUS

 

LAN STATUS:

100BaseT,

Full Duplex, Up

 

 

LINE STATUS:

Standard,

Auto, T1, Up

 

 

MAC ADDRESS:

00:20:A7:01:02:08

 

 

 

1)

Network Protocol:

Bridge

(Bridge, Router)

 

2)

Encapsulation:

cHDLC

(cHDLC, PPP)

 

3)

Timing

Source:

Internal

(Internal, HDSL)

4)BRIDGE CONFIGURATION

5)BRIDGE STATISTICS

6)SNMP CONFIGURATION

7)SAVE REX2 CONFIGURATION

WARNING: Configuration change(s) will be lost if not saved before resetting or powering unit down.

(R)eturn

ENTER CHOICE>

60

Campus-REX2 RS Interface Card User Manual