Chapter 3 - Configuring the REX2

2To select DHCP Relay, type 1 then press ENTER . The following fields, 2 and 3, are added to the screen as shown below.

Jul 07, 2003

ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34

Local Unit ID:

 

 

 

 

Local I/F: REX2

Remote Unit ID:

 

 

 

Remote I/F: REX2

Circuit ID:

 

 

 

 

 

 

DHCP SERVICES

 

 

1)

Service:

Relay

 

(None, Relay)

2)

Primary DHCP Server:

0

.0

.0

.0

3)

Secondary DHCP Server:

0

.0

.0

.0

(R)eturn (M)ain Menu

ENTER CHOICE>

3To enter the IP address for the primary DHCP server to which the Campus-REX2 relays requests, type 2 then press ENTER . At the prompt, enter the IP address.

Required format is nnn.nnn.nnn.nnn

Enter Primary DHCP Server:10.0.0.26

To delete a DHCP server, enter the IP address 0.0.0.0. If the primary DHCP server is deleted and a valid secondary DHCP server is defined, the secondary DHCP server automatically becomes the primary DHCP server.

4To enter the IP address for the secondary DHCP server to which the Campus-REX2 relays requests, type 3 then press ENTER . At the prompt, enter the IP address.

Required format is nnn.nnn.nnn.nnn

Enter Secondary DHCP Server:192.150.0.54

To delete a DHCP server, enter the IP address 0.0.0.0. If the primary DHCP server is deleted and a valid secondary DHCP server is defined, the secondary DHCP server automatically becomes the primary DHCP server.

5Type R then press ENTER to return to the Router Configuration screen (page 3-46). (Typing M will return you to the Main Menu.)

54

Campus-REX2 RS Interface Card User Manual