ADC Campus-REX2 RS SETTING A PASSWORD

ENTER . At the prompt,

Chapter 4 - Managing System Parameters

SETTING A PASSWORD

A password prevents unauthorized access to Campus-REX2 configuration options via console port, TELNET, or remote Campus login. This password also controls access to the Campus-REX2 via FTP as required for software upgrade (see “Upgrading Campus Unit Software” on page 92). You can set a password with any combination of up to ten letters or numbers, but the first character must be a letter. Passwords are case-sensitive.

From the System Parameters menu, type 5 then press enter a password that contains up to 10 ASCII characters.

ENTER NEW PASSWORD (10 characters maximum):

*********

The new password takes effect immediately after it is entered and a save command is not required.

If you forget your password and cannot log onto the Campus-REX2, use the LCD to restore the configuration settings to their factory default values. This removes the password. For more information, see “Restoring the System to Default Values” on page 108.

Campus-REX2 RS Interface Card User Manual 69