Chapter 5 - Monitoring and Testing the Campus System
Monitoring Current System Status
This screen provides information on the current performance of the Campus system including both local and remote HDSL alarms and HDSL performance.
From the System Status Menu, type 1 then press ENTER . The Current System Status screen is displayed.
Jul 07, 2003 | ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34 | ||||
Local Unit ID: Southall | Quad 4 |
| Local I/F: | REX2 | |
Remote Unit ID: Central |
|
| Remote I/F: REX2 | ||
Circuit ID: Southeast line 421 |
|
|
| ||
|
| CURRENT | SYSTEM STATUS |
|
|
Local Alarms: |
|
|
|
|
|
Remote Alarms: |
|
|
|
|
|
Loopback: None |
|
|
|
|
|
|
|
| |||
|
| LOCAL | REMOTE | LOCAL | REMOTE |
|
| ||||
|
| mn/cr/mx | mn/cr/mx | mn/cr/mx | mn/cr/mx |
Margin (dB): |
| na/na/na | na/na/na | na/na/na | na/na/na |
Pulse Attn (dB): | 00 | 00 | 00 | 00 | |
24 Hour ES: |
| 00000 | 00000 | 00000 | 00000 |
24 Hour UAS: |
| 05671 | 00000 | 05671 | 00000 |
Last Cleared: |
| None |
|
|
|
|
| (U)pdate (C)lear |
|
| |
|
| (R)eturn | (M)ain Menu |
|
|
ENTER CHOICE> |
|
|
|
|
|
The Current System Status screen provides the following information:
•Local Alarms indicates the current local alarm status.
•Remote Alarms indicates the current remote alarm status.
•Loopback indicates the current loopback status. If no loopback is active, the status is none.
•Margin indicates the minimum (mn), current (cr), and maximum (mx) HDSL margin value, measured in dB, relative to the
•Pulse Attenuation (Attn) indicates the decrease in amplitude of the transmitted signal as measured at the HDSL receiver (in decibels).
•24 Hour ES indicates the number of errored seconds over the last 24 hours.
•24 Hour UAS indicates the number of unavailable seconds over the last 24 hours.
•Last Cleared indicates the date and time when the error counter was last cleared.
75 |