Chapter 1 - Installing and Accessing the REX2
LOGGING OFF
From the Main Menu, type L then press ENTER to logout of the unit menus. If the Main Menu is not the current menu, type R or M (when available) then press ENTER to return to the Main Menu where you can logout as described above. The logout procedure is the same whether you are connected to the console port or through a telnet session.
USING THE MENUS
The bottom of each menu screen identifies all of the keys you can use on that screen. Several keys operate identically on all of the menu screens:
To: | Do this: | |
|
| |
Access menu items | Type the number of the item then press ENTER . | |
Return to the previous menu | Type R then press ENTER . | |
Return to the Main Menu | Type M then press ENTER when the menu is more | |
| than one level below the Main Menu. | |
Clear or update status | • | Type C then press ENTER to clear or reset the |
information |
| information on a status screen. |
| • | Type U then press ENTER to update the |
|
| information on a status screen. |
Configure options as described below:
For this option type: | Do this: | |
|
|
|
Select a value from a list of | 1 | Type the number of the option then press ENTER . |
predefined values |
| The option setting changes to the next value in the |
|
| list and the screen redraws. |
| 2 | Repeat the first step until the option is set to the |
|
| preferred value. |
Type in required information | 1 | Type the number of the option then press ENTER . |
|
| The screen prompts you for information. |
| 2 | Type the information in the format requested then |
|
| press ENTER . |
|
|
|
16 |