Chapter 1 - Installing and Accessing the REX2

Logging On a Remote Campus Unit

Log on the remote Campus unit which is at the far end of the HDSL connection from the local Campus unit you are logged into. The remote Campus unit is accessed through the Main Menu of the local Campus unit:

1From the Main Menu of the local Campus-REX2, type 5 then press ENTER . The following message is displayed:

Enter <ESC><ESC> to Exit Remote Login Mode.

Remote Login, Please wait. . . . . .

You can exit from this function or from the remote login by pressing ESC twice. The following logon screen is displayed.

Jul 07,

2003

ADC TELECOMMUNICATIONS, CAMPUS RS, Version

5.1 08:19:34

Local Unit ID:

Southall Quad 4

Local I/F:

REX2

Remote Unit ID:

Central

Remote I/F: REX2

Circuit

ID:

Southeast line 421

 

 

REMOTE_LOGON PASSWORD >

The menu header changes to indicate the remote unit ID as the local unit, and local unit ID as the remote. This shows that the terminal program is physically connected to the local unit, but is configuring as if it were connected to the remote unit.

If the remote unit is also a Campus-REX2, the screens and procedures on the Remote Main Menu are identical to those on the Local Main Menu, except the REMOTE LOGON option is not available. If the remote unit is not a Campus-REX2, the screens support that remote interface card (see the appropriate interface card user manual for a description of the screens and configuration options).

Campus-REX2 RS Interface Card User Manual

15