Chapter 1 - Installing and Accessing the REX2

LOGGING IN

Access the Campus-REX2 menus for configuration and management using any of these four logins, which can be concurrently connected:

a telnet session to the Campus-REX2 (see below)

a login to the local Campus unit through the Console port (see “Logging In a Local Campus Unit through the Console Port” on page 13)

a logon from a remote Campus unit through its Main Menu (see “Logging On a Remote Campus Unit” on page 15)

a login through the CMU in the Campus-Star chassis

Logging In a Campus Unit Using Telnet

Use telnet protocol to access the Campus unit for configuration and management over the Internet. From the Windows Start menu, select Run. Enter the telnet command and the IP address for the Campus-REX2 (default IP address is 192.168.1.1). The timeout for

disconnecting a telnet session is five minutes (time frame with no keyboard activity to the Campus unit). The following login screen is displayed:

TELNET LOGIN PASSWORD >

Enter the configured password (default password is ENTER ) to log on the Campus-REX2 Main Menu.

12

Campus-REX2 RS Interface Card User Manual