Chapter 3 - Configuring the REX2
Configuring the Bridge Unit IP
The Unit IP configuration sets up the way that the bridge receives its
IP configuration (statically or dynamically) and then provides fields where the IP address, subnet mask, and default gateway are entered.
1To configure the Unit IP information, from the REX2 Configuration and Status screen type 4 then press ENTER . The Bridge Configuration screen is displayed.
Jul 07, 2003 |
| ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34 | |||
Local Unit ID: |
| Local I/F: REX2 | |||
Remote Unit | ID: |
| Remote I/F: REX2 | ||
Circuit ID: |
|
|
|
|
|
|
| BRIDGE CONFIGURATION |
|
| |
| 1) | Bridge Filter Age (sec): | 300 |
| (10 - 100000) |
| 2) | SPANNING TREE CONFIGURATION |
|
|
|
| 3) | BRIDGE TABLE |
|
|
|
| 4) | ARP TABLE |
|
|
|
UNIT IP | 5) | IP Configuration: | Static |
| (Static, DHCP Client) |
| 6) | IP Address: | 192.168. | 1. | 1 |
|
| Subnet Mask: | 255.255.255. | 0 | |
| 7) | Default Gateway: | 0. 0 | .0 | .0 |
(R)eturn (M)ain Menu
ENTER CHOICE>
A DHCP server should be set up and active on your LAN prior to enabling DHCP client for the
1To select a dynamic IP configuration for the bridge, type 5 then press ENTER to select DHCP Client. Static is the default configuration.
When set to DHCP Client, the
When the IP Configuration is set to static, enter the IP address, subnet mask, and default gateway for the
38 |