Chapter 7 - Using the LCD for Configuration and Management
VIEWING SYSTEM INFORMATION
Through the LCD menu you can view the following product information (with the option name in parentheses):
•firmware version and PROM checksum (S/W REV and S/W CKSUM)
•hardware configuration information (H/W CONFIG)
•local unit ID (LOCAL UNIT ID)
•remote unit ID (REMOTE UNIT ID)
•remote interface card type (REMOTE I/F)
•circuit ID (CIRCUIT ID)
You cannot change any of this information through the LCD. Use an ASCII terminal to set the local and remote unit IDs, and the circuit ID. See “Identifying the Unit and Circuit” on page 67.
To view the system information:
1Press Escape until CAMPUS RS I/F: REX2 is displayed.
2Press Enter to view the firmware version and PROM checksum.
3Press Next to scroll through the remaining options.
VIEWING STATUS INFORMATION
The LCD provides access to the following status information:
•Ethernet information, such as the MAC address and
•Current HDSL margin
•Frame statistics on the LAN (Ethernet) and Line (HDSL) ports
115 |