Chapter 7 - Using the LCD for Configuration and Management
Configuring the Alarm
To enable or disable the local Loss of Signal alarm:
1From the CURRENT ALARMS display, press Next twice. LOCAL I/F ALARMS CONFIG & STATUS is displayed.
2Press Enter. The current status of the local alarm is displayed.
3 Press Next. LOC LOSS OF SIG ALM is displayed.
4Press Enter.
5Press Next to scroll through the settings for the alarm.
6Press Enter to select the preferred setting. LOC LOSS OF SIG ALM is displayed.
Remote Alarms
Loss of Signal (LOS) alarms can occur on the remote unit. This section describes how to view and configure this alarm.
Viewing Current Alarms
If the CURRENT ALARMS display indicates a remote alarm, you can determine the alarm type:
1From the CURRENT ALARMS display, press Next three times. RMT I/F
ALARMS CONFIG & STATUS is displayed.
2Press Enter. The current status of the remote alarm is displayed.
Configuring the Alarm
To enable or disable the remote Loss of Signal alarm:
1From the CURRENT ALARMS display, press Next three times. RMT I/F ALARMS is displayed.
2Press Enter. The current status of the remote alarm is displayed.
3Press Next. LOSS OF SIG ALM is displayed.
112 |