Chapter 6 - Managing Software
8At the FTP prompt, enter the command to permanently save the upgrade software to flash memory in the Campus-REX2, and restart the Campus-REX2 with the new software, as follows:
ftp> quote site updateOn a Windows-based PC, you may also use the command literal site update. This command may take a few seconds before returning to the FTP prompt. When the command completes, FTP, as well as Campus-REX2 console and LCD, display messages indicating that the upgrade is in progress. As indicated by the FTP message, the save-and-restart operation may take up to 1 minute to complete.
9At the FTP prompt, enter the command to exit FTP. ftp> bye
As noted previously, the Campus-REX2 unit will restart automatically.
10After the Campus-REX2 unit has restarted with the new software, you may log in to the Campus-REX2 console as described in “Logging In” on page 12.
The actual screen may differ based on the operating system that you use.
94 | Campus-REX2 RS Interface Card User Manual |