Chapter 3 - Configuring the REX2

4Enter any of the following:

•P to access the previous screen of the table

•N to access the next screen of the table

•F to find a specific table entry; the user is prompted to specify a MAC address for the destination device:

Required format is nn:nn:nn:nn:nn:nn

Enter Destination MAC Address:

•E to display all entries in a table without pages; this provides you the capability to capture this information to a file using a terminal emulation software (such as HyperTerminal or ProComm)

•U to refresh or update the table entries

•C to clear all entries from the table

Viewing the ARP Table

The ARP table can be accessed through either the Bridge or the Router configuration screens. An ARP table lists MAC addresses that are bound to IP addresses. The ARP table can contain a maximum of 60 entries with a fixed expiration time of 300 seconds. The ARP table entries are sorted by the IP address.

1From the Main Menu (page 1-14), type 2 then press ENTER to access the REX2 Configuration and Status screen. Either Bridge or Router can be selected.

2From the REX2 Configuration and Status screen, type 4 then press ENTER . Either the Bridge Configuration screen or Router Configuration

screen is displayed.

42

Campus-REX2 RS Interface Card User Manual