Chapter 3 - Configuring the REX2
3Do one of the following:
•From the Bridge Configuration screen, type 4 then press ENTER . The ARP Table is displayed.
•From the Router Configuration screen, type 6 then press ENTER . The ARP Table is displayed.
| ARP TABLE |
|
|
|
MAC ADDRESS | IP ADDRESS |
| PORT | |
00:00:00:00:00:01 | 156.10 | .0 | .1 | LAN |
00:00:00:00:00:03 | 156.10 | .0 | .3 | LAN |
00:00:00:00:00:04 | 156.10 | .0 | .4 | LAN |
00:00:00:00:00:06 | 156.10 | .0 | .6 | LAN |
00:00:00:00:00:07 | 156.10 | .0 | .7 | LAN |
00:00:00:00:00:09 | 156.10 | .0 | .9 | LAN |
00:00:00:00:00:0B | 156.10 | .0 | .11 | LAN |
00:00:00:00:00:0C | 156.10 | .0 | .12 | LAN |
00:00:00:00:00:0F | 156.10 | .0 | .15 | LAN |
00:00:00:00:00:11 | 156.10 | .0 | .17 | LAN |
00:00:00:00:00:12 | 156.10 | .0 | .18 | LAN |
00:00:00:00:00:14 | 156.10 | .0 | .20 | LAN |
00:00:00:00:00:15 | 156.10 | .0 | .21 | LAN |
00:00:00:00:00:18 | 156.10 | .0 | .24 | LAN |
00:00:00:00:00:19 | 156.10 | .0 | .25 | LAN |
00:00:00:00:00:1B | 156.10 | .0 | .27 | LAN |
(P)revious (N)ext (F)ind (E)ntire table (U)pdate table (C)lear table
(R)eturn (M)ain Menu
TABLE>
4Enter any of the following:
•P to access the previous screen of the table
•N to access the next screen of the table
•F to find a specific table entry; the user is prompted to specify an IP address for the destination device:
Required format is nnn.nnn.nnn.nnn
Enter Destination IP Address: 156.10.0.28
•E to display all entries in a table without pages; this provides you the capability to capture this information to a file using a terminal emulation software (such as HyperTerminal or ProComm)
•U to refresh or update the table entries
•C to clear all entries from the table
43 |