Chapter 3 - Configuring the REX2
Managing the Static Routing Table
The entries in this routing table were configured by a user (entered statically). This table contains a maximum of 32 entries. You can manage entries or you can also add new entries from this screen. The destination shown on this screen is for a host route, but not for a specific host device.
You can also configure the default gateway in the static routing table by entering a destination IP address of 0.0.0.0 with a subnet mask of 0.0.0.0 and then entering the IP address for the default gateway (see page
The Static Route Table can be accessed from both the Router Configuration and the Static Route Configuration screens.
1Do one of the following to access the Static Route Table:
•From the Router Configuration screen, type 5 then press ENTER .
•From the Static Route Configuration screen, type 3 then press ENTER . The Static Route Table is displayed.
|
| STATIC ROUTE TABLE |
|
|
|
|
DESTINATION |
| SUBNET MASK | GATEWAY ADDRESS | HOP | ||
192.128.128. | 60 | 255.255.255.252 | 192.150. | 10. | 50 | 1 |
168.120.100. | 12 | 255.255.255.252 | 192.150. | 10. | 50 | 1 |
172.100.200. | 25 | 255.255.255.255 | 192.150. | 10. | 50 | 1 |
(P)revious (N)ext (F)ind (E)ntire table (C)lear table (A)dd route (D)elete route (R)eturn (M)ain Menu
TABLE>
57 |