CONFIGURING 2 HDSL PARAMETERS
Campus units have a default HDSL configuration to operate in Standard Mode with a T1 (1.544 Mbps) HDSL Rate. This default configuration is compatible with other Campus-RS and Campus-HRS products (including the Campus-T1 desktop units and line units) if you choose to operate them in their default configuration.
You can also configure the HDSL parameters through the LCD menus. See “Using the LCD for Configuration and Management” on page 7-97for instructions on using the LCD panel. To view system performance and other status information, see “Monitoring and Testing the Campus System” on page 5-73.
Changes to the HDSL operating mode or transmission rate are not automatically made to the remote unit. These changes must be made at both the local and remote units for the HDSL link to be re-established. If the remote unit is not easily accessible, you can follow the instructions in “Logging On a Remote Campus Unit” on page 1-15to use a PC for a remote logon (if an HDSL link is up) and make the preferred change. When you change the HDSL settings on the remote unit, the HDSL link is lost; it is re-established when you make the identical change(s) on the local unit.
Campus-REX2 RS Interface Card User Manual | 19 |