AMX NXT-CV7 @PSE-popup page nameshow effect name, Sendcommand Panel,@PSE-Popup1Slide from Left

Programming

Page Commands (Cont.)

@PSE Syntax:

Set the show	"'@PSE-<popup page name>;<show effect name>'"
effect for the	Variable:
specified popup
	popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed
page to the
	On.
named show
effect.	show effect name = Refers to the popup effect name being used.
	Example:

	SEND_COMMAND Panel,"'@PSE-Popup1;Slide from Left'"
	Sets the Popup1 show effect name to ’Slide from Left’.
@PSP	Only 1 coordinate is ever needed for an effect; however, the command will specify both.
Set the show	This command sets the location at which the effect will begin at.
effect position.	Syntax:
	"'@PSP-<popup page name>;<x coordinate>,<y coordinate>'"
	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed
	On.
	Example:
	SEND_COMMAND Panel,"'@PSP-Popup1;100,0'"
	Sets the Popup1 show effect x-coordinate value to 100 and the y-coordinate value to 0.
@PST	Syntax:
Set the show	"'@PST-<popup page name>;<show effect time>'"
effect time for the	Variable:
specified popup
	popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed
page.
	On.
	show effect time = Given in 1/10ths of a second.
	Example:
	SEND_COMMAND Panel,"'@PST-Popup1;50'"
	Sets the Popup1 show effect time to 5 seconds.
PAGE	Flips to a page with a specified page name. If the page is currently active, it will not redraw
Flip to a specified	the page.
page.	Syntax:
	"'PAGE-<page name>'"
	Variable:
	page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Panel,"'PAGE-Page1'"
	Flips to page1.

7" Modero Widescreen Touch Panels 117